Hi!
Any advise how to mount a Hawkeye Thumb on Mobula8?
Without any major mods. Did not find any 3D print which I like. Also would like to leep 30deg camera tilt
Thanks

I think its almost the same canopy like the crux3. So maybe this will work?
https://www.happymodel.cn/index.php/2020...sta360-go/

On my mobula7 I have two zip ties that make two loops that I slide my runcam thumb into. It works surprisingly well, but depends on your canopy and attachment points to achieve a good angle.

(06-Mar-2024, 01:52 PM)FPVme Wrote: On my mobula7 I have two zip ties that make two loops that I slide my runcam thumb into. It works surprisingly well, but depends on your canopy and attachment points to achieve a good angle.

Trying to imagine.....
Have you hot a picture by any chance?

Hope this image hosting works!





Action cam slides into the zip ties with just enough tightness that it does not move around but can also be put in and out easily. Lucky that it worked with this frame, but maybe you can Mcguiver something similar.

(06-Mar-2024, 06:17 PM)FPVme Wrote: Hope this image hosting works!





Action cam slides into the zip ties with just enough tightness that it does not move around but can also be put in and out easily. Lucky that it worked with this frame, but maybe you can Mcguiver something similar.

Thanks.

That's brave though. I would be paranoid not to lose it

The power plug secures it from sliding back out, acting as a stop in that direction. Additionally it's a mobula7, so I'm never all that far away from it while flying.