Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
IntoFPV Forum › Hardware Discussion › Digital FPV Systems v
Help dji googles

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
dji googles
slowbooy Offline
Member
*
Posts: 46
Threads: 13
Likes Received: 0 in 0 posts
Likes Given: 3
Joined: Jun 2020
Reputation: 0
#1
08-Apr-2021, 05:38 AM
hi,
when i bind the googles with caddx vista but there is a massege low latrecy and i can not record how can i fix this
Reply
Login to remove this ad | Register Here
V-22 Offline
VIP
***
Posting Freak
Posts: 1,529
Threads: 49
Likes Received: 720 in 531 posts
Likes Given: 481
Joined: Oct 2020
Reputation: 93
#2
08-Apr-2021, 05:54 AM
The Vista needs to be connected to a flight controller and receive an armed signal to go to full power mode. It goes into low power mode when disarmed to prevent it from overheating on the ground.

What is your setup?
[-] The following 1 user Likes V-22's post:
  • Titanv11
Reply
slowbooy Offline
Member
*
Posts: 46
Threads: 13
Likes Received: 0 in 0 posts
Likes Given: 3
Joined: Jun 2020
Reputation: 0
#3
08-Apr-2021, 02:04 PM
(08-Apr-2021, 05:54 AM)V-22 Wrote: The Vista needs to be connected to a flight controller and receive an armed signal to go to full power mode. It goes into low power mode when disarmed to prevent it from overheating on the ground.

What is your setup?
my setup babyhawk ii hd with nano tbs reciver
i tried to arming after that setting in dji googles change from 25mv to 500 mv but the same issue there is a massege on screen low letracy can not record
Reply
kafie1980 Offline
Just trying to be helpful
***
Posting Freak Popular Member
Posts: 4,550
Threads: 38
Likes Received: 1,245 in 1,064 posts
Likes Given: 430
Joined: Aug 2020
Reputation: 118
#4
08-Apr-2021, 02:15 PM
Does the Caddx Vista unit have the antenna ufl connecter secure?
Reply
V-22 Offline
VIP
***
Posting Freak
Posts: 1,529
Threads: 49
Likes Received: 720 in 531 posts
Likes Given: 481
Joined: Oct 2020
Reputation: 93
#5
08-Apr-2021, 04:24 PM
(08-Apr-2021, 02:04 PM)slowbooy Wrote: my setup babyhawk ii hd with nano tbs reciver
i tried to arming after that setting in dji googles change from 25mv to 500 mv but the same issue there is a massege on screen low letracy can not record

If this is a new BNF quad I would reach out to the manufacturer/vendor for support so you're covered if it's a hardware issue.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help New DJI O3 air unit will not connect to dji assistant 2 Mattyylite 2 174 16-Jun-2024, 01:59 AM
Last Post: Mattyylite
  Help DJI Air Unit, Goggles v2, and flysky rx/tx mj451971 1 238 27-May-2024, 08:36 PM
Last Post: mstc
  Dji Goggles v2 or Integra? jimskeet2002 11 4,910 24-May-2024, 04:19 PM
Last Post: mattyfleischfpv
  DJI Channel/Video Signal Strength in OSD BadRaven 2 246 08-May-2024, 09:28 PM
Last Post: SnowLeopardFPV
  DJI broadcast question husafreak 3 216 02-May-2024, 04:12 PM
Last Post: husafreak


Login to remove this ad | Register Here