Currently, I am building an fpv drone with a Caddx Tarsier V2 and I am having bad experiences with it. It needs a u3 sd card, 32 gb or less and anything larger will not work. Anyways, I satisfied the previous conditions and yet, my Caddx Tarsier will still not recognize a Micro SD card in the reader. Does anyone know what might be the cause of this? One thing I noticed is that for the app, the battery logo for the Caddx is at 3/4, not sure if that might be helpful or not. Thanks for the help in advanced!

Did you format to fat32?

On a side note, most device that requires fat32 can use larger SD card. 32gb is the limit for fat32. It is a windows limit. You can use a third party formatting app to format larger SD card into fat32.

(29-May-2021, 09:16 PM)voodoo614 Wrote: Did you format to fat32?

On a side note, most device that requires fat32 can use larger SD card. 32gb is the limit for fat32. It is a windows limit. You can use a third party formatting app to format larger SD card into fat32.

Yes, I did format to fat32. Thanks for telling me that fat32 has a maximum size though, that is something I never knew. Could it be something with the power and that there is not enough electricity running into the Tarsier so that the card reader can't read? I can transmit video from the Caddx Tarsier to an Ipad, so I'm not sure if it has something to do with power.

(29-May-2021, 09:21 PM)DroneNeophyte Wrote: Yes, I did format to fat32. Thanks for telling me that fat32 has a maximum size though, that is something I never knew. Could it be something with the power and that there is not enough electricity running into the Tarsier so that the card reader can't read? I can transmit video from the Caddx Tarsier to an Ipad, so I'm not sure if it has something to do with power.

I don't think it is power issue. Sometimes these camera are very picky a out the SD card you use. That is why I tend to stick with well known brands.