My original setup was 100% DJI, controller and goggles. The buzzer worked with no issue.

I have changed to DJI goggles (VX) and ELRS controller (RX) with Radiomaster Zorro. I can't figure out how to get the buzzer back...?

I currently have the Beeper (middle toggle) and Flip Over Crash (top toggle) on the same toggle switch running on AUX 4, and the toggle is changing in betaflight Modes.

What am I missing here to get the buzzer to work?

Thank you

On the configuration tab of betaflight, under “d shot beacon settings”, enable the option RX_SET “beeps when aux channel is set to beep”.

Don’t forget to hit save.

Do you have a real buzzer installed on the quad or was it just the motors making the beeping noise before?

Can you please run both the "dump" and "diff all" commands in the Betaflight Configurator CLI tab and copy/paste the results back here so we can check the configuration of your quad.