BetaFPV have just announced a new transmitter in their LiteRadio range named the LiteRadio 3 Pro. Details below.

BetaFPV Web Shop: https://betafpv.com/products/literadio-3...ransmitter

Specifications:-

• Item: LiteRadio 3 Pro Radio Transmitter
  
• Channel: 8 Channels
  
• Gimbal: Hall Sensor
  
• Frequency Range: 2.4G
  
• RF System: SX1280 / CC2500
  
• Antenna: Internal Antenna
  
• RF Output Power: 50mW, 100mW, 250mW, 500mW (ELRS 2.4G) / 100mW (CC2500)
  
• Screen: 1.3 inch OLED display screen
  
• Protocol Option: ExpressLRS 2.4G / CC2500 (Frsky D, Frsky X, SFHSS)
  
• Battery: Built-in 2000mAh 1S Battery
  
• Operating system: EdgeTX
  
• Port: Type-C USB 3.0 port / 3.5mm Audio port
  
• USB Support: Most Practice Simulator / USB charging / Firmware update / Passthrough (ELRS 2.4G)
  
• Recommend External TX Module: ELRS Nano TX Module
  
• Recommend Accessories: Nano Gimbal for LiteRadio 3 Pro, Storage Case, Transmitter Neck Strap
  
• Price: $89.99 USD
  

Not bad for the specs. Hopefully the 1S internal lipo can actually allow 500mW output power for the ELRS module.

It certainly looks quite good in the photos and from the specs on paper. Maybe BetaFPV quality is finally improving. I guess we need to wait for some trusted impartial reviews before we can pass any judgement, unless someone is prepared to take a gamble and buy a newly released BetaFPV product before anyone has released a review on it.

Albert Kim posted this on his youtube community page :

Quote:BETAFPV released the LiteRadio3 PRO for pre-order
today but it's not finished yet. My review sample
came with EdgeTX 2.6 but I'm not able to update to
2.7. Mine came with unfinished ELRS firmware on the
internal TX module that only goes up to 250mW not
500mW and I'm not able to update in ExpressLRS
configurator to add my binding phrase. If they
expect customers to be happy with these limitations,
they should finish the product before releasing it for
pre-order. Until these issues are resolved it's not in a
state worth buying. I have not heard from the ELRS
devs about this (I assume they have the same
sample I got) and I'm certain this radio won't get
their endorsement either. I'm sure you'll find some
glowing reviews out there but whatever they got isn't
what I got!

A few initial overviews of the BetaFPV LiteRadio 3 Pro and also Oscar's review are below. One thing to note is that while the internal module on the ExpressLRS version is capable of going up to 500mW, BetaFPV advise against using that power level because the internal module will overheat, not to mention that the internal 1S transmitter battery will likely last no time at all running at that sort of power output.

Oscar's Review: https://oscarliang.com/betafpv-literadio-3-pro

YouTube Overviews: