Posts: 62
Threads: 15
Likes Received: 4 in 1 posts
Likes Given: 0
Joined: Mar 2021
Reputation:
0 Hey all- I picked up the Chimera5 LR and have hit a new one.
I have everything set-up, but when I pull the battery after 30 seconds out starts to beep non-stop.
I have tried using "Beeper -All" in Betaflight and that did not seem to change anything.
Does anyone have any ideas? Is there a button somewhere I'm missing? My hunch is that it's a feature to find the drone if the battery got torn off.
Thanks,
Jake
• Posts: 21,418
Threads: 596
Likes Received: 9,039 in 6,690 posts
Likes Given: 1,428
Joined: Jun 2018
Reputation:
796 It probably has a self-powered buzzer installed on it. If you can locate the buzzer then look for a button on it and hold it down for a few seconds. The other way to disarm some of the self-powered buzzers is to momentarily re-plug the LiPo and then unplug it again.
• Posts: 62
Threads: 15
Likes Received: 4 in 1 posts
Likes Given: 0
Joined: Mar 2021
Reputation:
0 Found it! I figured it had to a button. I’d even been pressing it at one point but it had a lot of heat shrink on it.
• Posts: 8
Threads: 2
Likes Received: 0 in 0 posts
Likes Given: 1
Joined: Mar 2021
Reputation:
0 Hi! I'm having the same issue right now. Where is the button located on the beeper?
• Posts: 62
Threads: 15
Likes Received: 4 in 1 posts
Likes Given: 0
Joined: Mar 2021
Reputation:
0 It’s super hard to find it. It’s toward the back of the buzzer apparatus. It’s a tiny black button covered with shrink wrap and probably obscured by wires. I had to use one of my small allens to reach in and hold it for about 3 seconds.
I’ve since moved all the guts from that drone onto a QAV-Cine Freybot. Still dealing with it on there, but made it easier to reach.
•