Posts: 41
Threads: 17
Likes Received: 2 in 2 posts
Likes Given: 11
Joined: Jun 2023
Reputation:
-1 Hello! After flashing the ESC using JESC, I cannot set the position of the drone, in the configuration tab I can change the rotation angle R, P, Y to 90 degrees, to 180. Nothing changes. Question: Do I need to flash the FC again?
thx
• Posts: 12,099
Threads: 125
Likes Received: 3,739 in 2,836 posts
Likes Given: 99
Joined: Feb 2017
Reputation:
388 Normally, if settings are not saving, then you might have a firmware/configurator mismatch. Make sure your BF firmware works with the BF configurator.
•