Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
2S explorer build
#16
Quote:I've seen that sort of signal drop before. You got far enough out that a rooftop obstructed line of sight. My local obstruction is a brand new storage unit facility. The second I get below that, a perfect signal turns to barely hanging on.

Looks like it endures the wind quite well though. Just little bumps up there. How's the ground wind speed?

Yeah I've noticed on a few flights that I need to be up higher.  At first it was 100m then to get to 900m distance I needed to be at approx 120m altitude.  It's getting a bit high now and it is an urban area in a flight path to the local aerodrome 5km away so I'm not uber keen on going higher.  I need to stand on a ladder!

Yeah it handles the (light) winds well.  I took data from the local weather app, was pushing 10-15km/h winds so quite light.


Quote:Is that the v2 or v3 VTX and you have it at full power? I would have thought the 350/500mw would get you past 1km assuming you have clear LOS. Which patch antennas are you using and were they pointing in the right direction, at that range if your head facing is off slightly that could affect your reception. You can try some slow head turning if you see your signal dropping. Or maybe its the rooftop issue Suros mentioned.

Yup V3 at full power with the heatsink casing removed but heatsink die still in place on the main chip.   No patch antennas yet.  Just truerc lhcp stubbies on the goggles with the single TX antenna using a long lhcp antenna.   I'm trying to get the most out of it before I go patches.
Reply
Login to remove this ad | Register Here


Possibly Related Threads...
Thread Author Replies Views Last Post
  Build BetaFPV Meteor65 Pro 1S Build brettbrandon 30 769 14-May-2024, 06:03 PM
Last Post: brettbrandon
  First FPV build. 3.5" help Pums 11 335 11-May-2024, 09:40 AM
Last Post: Pums
  AOS 3" Toothpick build SeismicCWave 38 861 07-May-2024, 08:23 PM
Last Post: SeismicCWave
  Meteor65 pro walksnail build, 24g. ph2t 2 162 07-May-2024, 04:11 AM
Last Post: FPVme
  Build Meteor75 Build (Revision 4) :) Pathfinder075 9 636 14-Apr-2024, 03:28 AM
Last Post: Pathfinder075


Login to remove this ad | Register Here