Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.
IntoFPV Forum › Hardware Discussion › Motor, ESC and Prop v
Wrecked my motors :(

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
Wrecked my motors :(
sirdude Offline
VIP
***
Pole Dancer Quad Builder Tree Hugger Whoopee Owner Popular Member Posting Freak
Posts: 1,290
Threads: 67
Likes Received: 713 in 473 posts
Likes Given: 1,216
Joined: Mar 2016
Reputation: 23
#8
14-Apr-2018, 10:42 PM
The key to soldering is to have a good tip, the correct temperature and to get in and out quickly.  Br sure everything is  clean going in...use a little alcohol on the pads if in doubt.  Takes a little practice, but you'll get it! Thumbs Up
"Damn the torpedoes!!!  Full speed ahead!!!"
[-] The following 1 user Likes sirdude's post:
  • kaitylynn
Reply


Messages In This Thread
Wrecked my motors :( - by Jakefpv - 14-Apr-2018, 12:07 AM
RE: Wrecked my motors :( - by voodoo614 - 14-Apr-2018, 01:19 AM
RE: Wrecked my motors :( - by Jakefpv - 14-Apr-2018, 02:40 AM
RE: Wrecked my motors :( - by Tom BD Bad - 14-Apr-2018, 06:18 AM
RE: Wrecked my motors :( - by xcalibur - 14-Apr-2018, 11:09 AM
RE: Wrecked my motors :( - by Jakefpv - 14-Apr-2018, 09:31 PM
RE: Wrecked my motors :( - by kaitylynn - 14-Apr-2018, 10:34 PM
RE: Wrecked my motors :( - by sirdude - 14-Apr-2018, 10:42 PM
RE: Wrecked my motors :( - by Jakefpv - 14-Apr-2018, 10:45 PM
RE: Wrecked my motors :( - by sirdude - 14-Apr-2018, 10:52 PM
RE: Wrecked my motors :( - by Jakefpv - 14-Apr-2018, 11:10 PM
RE: Wrecked my motors :( - by kaitylynn - 15-Apr-2018, 12:42 AM
RE: Wrecked my motors :( - by Jakefpv - 15-Apr-2018, 12:44 AM
RE: Wrecked my motors :( - by Eli D. - 14-Apr-2018, 11:19 PM
RE: Wrecked my motors :( - by kaitylynn - 15-Apr-2018, 12:37 AM
RE: Wrecked my motors :( - by kaitylynn - 15-Apr-2018, 01:01 AM
RE: Wrecked my motors :( - by Jakefpv - 15-Apr-2018, 03:40 AM
RE: Wrecked my motors :( - by kaitylynn - 15-Apr-2018, 04:33 AM
RE: Wrecked my motors :( - by Krohsis - 15-Apr-2018, 01:13 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Default BetaFlight 4.5 motors run hot EyeBotXander 35 818 20-Jun-2024, 08:40 PM
Last Post: Rob Axel
  Can $5 motors be any good? 1805-1550kv mstc 22 457 01-Jun-2024, 11:26 PM
Last Post: mstc
  Help Motors not spinning polar223 16 540 31-May-2024, 09:50 PM
Last Post: SeismicCWave
  Motors spin rough then stop MajorKook 4 162 18-May-2024, 08:53 PM
Last Post: MajorKook
  one of the motors does not arm balabushka 4 202 01-Apr-2024, 09:54 PM
Last Post: Rob Axel


Login to remove this ad | Register Here