![[Image: 461f7620ae03180a3845d3a7aebcd737.jpg]](https://uploads.tapatalk-cdn.com/20190323/461f7620ae03180a3845d3a7aebcd737.jpg)
![[Image: 41c3b9843aad5a5ebf28a3d44536fc89.jpg]](https://uploads.tapatalk-cdn.com/20190323/41c3b9843aad5a5ebf28a3d44536fc89.jpg)
Well one thing leads to another and I figured I’d assemble the differentials. I’m using a really stiff/dry silicone grease this time around. The diffs aren’t in great condition but I’ve had worse in the Spiders and they still work ok.
![[Image: b24b03a83b028bac0d9101027ffc6043.jpg]](https://uploads.tapatalk-cdn.com/20190323/b24b03a83b028bac0d9101027ffc6043.jpg)
![[Image: f55b81094633cc0e93e5a2760a302dfe.jpg]](https://uploads.tapatalk-cdn.com/20190323/f55b81094633cc0e93e5a2760a302dfe.jpg)
![[Image: 06716988c1f87df48818dcda97d09a77.jpg]](https://uploads.tapatalk-cdn.com/20190323/06716988c1f87df48818dcda97d09a77.jpg)
It’s obvious now that I’m assembling the car that the plastics have been chewed out by overtightening the screws, for the moment it’s holding together but I’ll need to use a drop of ABS adhesive down the holes if I need to redo these in the future.
![[Image: 3d88e9f6f2dd883e39665004d649faf5.jpg]](https://uploads.tapatalk-cdn.com/20190323/3d88e9f6f2dd883e39665004d649faf5.jpg)
![[Image: b5d0c3bd568410254d2f09099e440118.jpg]](https://uploads.tapatalk-cdn.com/20190323/b5d0c3bd568410254d2f09099e440118.jpg)
It doesn’t take much and I’m at step 6. Before progressing further I’ll have to remove the motor, tank and top deck (all only temporary installs while testing the motor.
I also should reduce the front bumper mount “bend” in the chassis. I suspected it was bent up further by the crash that bent the suspension shaft, and it is a little lop-sided.
Should be an easy job. I have a vice and an array of hammers
![Smile Smile](https://intofpv.com/images/smilies/smile.png)