So i don't know how this thread will work out, but if you have a tune that you setup and are happy to share it, post them in here along with a description of your quad and it's weight.  Or maybe you found some tuning presets on a YT video, post them in here, along with a link to the video.

I'll start with a set I found on a video.



Spec


Tune


Rates - Silverware

Just something that people should be aware of if they aren't already is that every tune is going to be different unless you have the exact same frame, motors, and hardware setup as the person who posted the tune settings. It's why all the tuning experts say never just copy someone else's tune as there is a chance of damaging the ESCs or motors on your quad. Copying rates is fine, but tuning parameters are a different story. Even using the tune as a baseline on a different quad can be risky.

If however you have the exact same setup then you should be reasonably safe to at least use the settings as a baseline to start from if nothing else.

Yes, please use these as a possible start point for whatever you are flying. So on my example, if you had a similar build, you could maybe use those tuning examples as the start of your tuning journey, or at least it might give you a rough guide of where you might need to be to achieve a more locked in flight. But all quads are different. This area is probably more suited to BNF's and RTF's that have been tuned by the user, or in time we might see quads that come factory installed with Quicksilver that are tuned accordingly.