Nice, but in case you are interested in another project, it seems your meter may be transmitting on the Zigbee protocol. If you have a Zigbee hub, don't know if you can directly connect to it. Otherwise maybe you can hack the transmission with a SDR receiver.

https://www.reddit.com/r/homeassistant/c...ys_meters/

(27-Apr-2024, 08:32 PM)mstc Wrote: Nice, but in case you are interested in another project, it seems your meter may be transmitting on the Zigbee protocol. If you have a Zigbee hub, don't know if you can directly connect to it. Otherwise maybe you can hack the transmission with a SDR receiver.

https://www.reddit.com/r/homeassistant/c...ys_meters/

LOL, yeah that can be fun. Today's project is to trouble shoot a quad. It flipped onto the ground. Video was perfect the whole way. There is no RX loss warning but I am not sure if I have that setup since this is a Walksnail system and I had a hard time getting the OSD from BetaFlight to work at first. So I may have cull everything. Then I walked to bring it back and flew again. Flew out the rest of the pack and another pack and it is all good. I am going to cut off the connector to the Rx and direct solder. I like to used 4 pins connectors because I used to swap RX for testing a lot on my fixed wings.

(27-Apr-2024, 07:51 PM)SeismicCWave Wrote: Thank you for reminding me. Sometimes the simplest solution is just that, simplest and works the best. 

I don't mind tinkering and learning/doing something new. However being a lazy person and always wanting to take the easy way out your reply gave me an epiphany.

The Blink camera is a wide angle camera. As such it should be able to move closer and stays in focus.

So I did and it worked.

Thank you.

There's using your noggin... can not remember how many times "the answer" comes if you can wait it out. Have learned to at least write it down as it comes in lest I forget.