This is my first build I did after reading and doing research for about 2-3 month. (BIG thanks to Oscar Liang and his Blog for all the great info!!)
The Quad weights roughly 520g without Battery (including HD Cam). So far I only used Gemfan 5x3 props, although I plan on trying out 6x3.
I had some trouble with a bad Video signal at the start cause my first LC filter was bad... got a new one now and its much better. I am using the Quanum DIY FPV Goggle V2. The next step will probably be an upgrade towards the Fatshark Dominator V3 once I get better at FPV manual flying.
Parts List:
This is a little video of me having some fun FPV in a local park.
I am just now getting better at manual flight mode, the video was still made using Angle mode...
And here are some pictures:
All the parts before building
Putting it together:
Final version (for now )
Any questions? Just ask!
The Quad weights roughly 520g without Battery (including HD Cam). So far I only used Gemfan 5x3 props, although I plan on trying out 6x3.
I had some trouble with a bad Video signal at the start cause my first LC filter was bad... got a new one now and its much better. I am using the Quanum DIY FPV Goggle V2. The next step will probably be an upgrade towards the Fatshark Dominator V3 once I get better at FPV manual flying.
Parts List:
- Flight Controller: Flip 32+
- Motors: Cobra 2204 1960Kv
- Props: Gemfan 5x3
- ESCs: ZTW Spider Series 18A OPTO
- Radio Receiver: FrSky X4RSB
- Radio: FrSky Taranis X9D
- Video Transmitter VTX: Eachine TS5823 5.8G 200mW
- OSD: not yet installed, I have a Micro MinimOSD sitting on my bench
- LiPo: ZIPPY Compact, 4S, 1800mAh
- HD Camera: Xiaomi Yi
This is a little video of me having some fun FPV in a local park.
I am just now getting better at manual flight mode, the video was still made using Angle mode...
And here are some pictures:
All the parts before building
Putting it together:
Final version (for now )
Any questions? Just ask!