ZMR-180 - The lil' whiner

I couldn't resist not to hop on the 180 train this winter. So I ordered a ZMR-180 frame because it was so cute and tiny compared to its big brother. This time I chose the red and black design line.
I am ahead of tuning procedure and maiden flight, but I'm in love with it so far. It weighs 290gr without battery.



The setup:
Flight Controller: Naze32 Rev.6 /w Betaflight
Motor: SunnySky X2204 2300KV
Propeller: DAL Tri 4045BN
ESC: FVT LittleBee 20A /w BlHeli 14.3
PDB: Matek Dual BEC PDB v3.1
Radio RX: D4R-II
VTX: Boscam TS5828 600mW
OSD: microMinim OSD /w latest MWOSD
FPV camera: Sony SuperHAD 2 600TVL
LiPo: Turnigy nano-tech 1300mAh 45-90C 4S (152gr) / 1300mAh 45-90C 3S (115gr)
HD Camera: Xiaomi Yi / or none

Pros:
+light small frame
+very very stiff and durable
+good power to weight ratio 
+takes normal size fpv cameras
+triblade whining
+cuteness factor :-D

Cons:
-less space but I could easily fit everything in there
-camera plate needed some sanding to fit perfectly 
-that's it so far

Build video: