Posts: 15
Threads: 4
Likes Received: 1 in 1 posts
Likes Given: 1
Joined: Jan 2017
Reputation:
0 Hey guys, finally got my wizard in the mail. I've soldered my Spektrum satellite to my FC board and bound it. In Betalflight I can see that the TX is sending signals to the quad, but once I disconnect from Betaflight I can't get the quad to do anything. Also, my vtx is pretty warm. Is this normal?? Yes, I had the antenna screwed onto it before I plugged it in.
• Posts: 52
Threads: 11
Likes Received: 21 in 11 posts
Likes Given: 1
Joined: Dec 2016
Reputation:
3 Did you set an arming procedure in the betaflight or on the rx? It might just be a matter of arming the quad.
• Posts: 52
Threads: 11
Likes Received: 21 in 11 posts
Likes Given: 1
Joined: Dec 2016
Reputation:
3 While you where setting up the arm switch in beta flight was the program registering when the switch was thrown? Also I am not really familiar with the rx but is the maybe another arm sequence set in the setting for it? I know sometimes they default to yaw down.
• Posts: 2,416
Threads: 51
Likes Received: 1,861 in 1,175 posts
Likes Given: 3,315
Joined: Mar 2016
Reputation:
74 On my DX8, I always have to lower the bottom throttle endpoint to be able to arm (I usually just adjust it all the way down).
• Posts: 1,773
Threads: 30
Likes Received: 1,199 in 755 posts
Likes Given: 714
Joined: Oct 2016
Reputation:
45 When you flip your arm switch, is your flight controller responding? (LED on board changing from red to blue?)
•