Anyone else having problems with Cleanflight and the BlHeli passthrough on a Skyline 32 (Naze 32 rev 5). It worked fine the other day and I changed my motors today and couldn't get to BlHeli to alter the direction of 2 of them. Cleanflight is laggy and locks up and the battery voltage is claimed as 1.4V at the top of the page without a LiPo plugged in and I couldn't get it to spin the motors when I did plug one in. I've had to just swap a couple of wires and hope that the ESC's are still ok on the new motors. I've got Little Bee 20A's, I'm pretty new to all of this but it did work before this Aniversary Update a couple of days ago.

If you feel this all started after Windows update try reinstalling the drivers you'll find on the Cleanflight configurator welcome screen. The 1.5v your seeing without a battery plugged in is normal, it's the voltage coming in from the USB. Is the Win10 update the only thing that changed since everything worked correctly. When you say the motors wont spin, is that through the motors tab in the configurator (with your props off?