Quote:Hey guys, I am pretty much brand new to flying quad copters and have only owned mine for about a month. I have had some pretty gnarly crashes so far and I think that is what caused my problem. I noticed that my antenna has been falling out for no reason when I punch it too hard. I have a (Wizard x220 btw). So I have just been putting it back in because I didnt realize it was supposed to be screwed on. Little did I know I am missing the threaded bolt that screws on. So I lost my stock antenna while flying yesterday. Therefore, I ordered this Cloverleaf Antenna which is better anyways. My SMA Connector looks like this: https://gyazo.com/0585a2b5818c3407645457a007b5f6d2, https://gyazo.com/11d8670965cee06d63866b5e7de3de5d. When it should look like this: https://gyazo.com/1cfb4399c3f3c442158b16c06f1974ad. I just need to know what to buy as the replacement part so I can get back up and running when my new antenna comes. Thank you!

It broke. You will need a new connector or solder the new antenna directly. If you have no experience, then seek help locally. Also, it is possible that the VTX burned out. It dies if it is powered on without an antenna