Hi,

I'm wondering what these four rings are for. They were included with my motors. I'm a bit confused because there are two of the green o rings and two metal ones per motor. But I'm guessing I'd one each per screw?
Are these for dampening? If so, how do I correctly mount them?

Thanks!

you will see if you remove a bell, unplug the c-clip or opennthe screw on the bottom. take away the bell.

which motors do you use?

(14-Jan-2021, 09:12 PM)hugnosed_bat Wrote: you will see if you remove a bell, unplug the c-clip or opennthe screw on the bottom. take away the bell.

which motors do you use?

So they're not meant for mounting the motors?
T-Motor F60.

Thanks.

no, these are replacement parts for the bell mounting.

On the internal side of the bell, the rubber ring goes into the steel shaft first, followed by the metal ring.