Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
U.fl to SMA
#1
I had to replace the pigtail on my TBS Unify Pro HV.  I can't get the new one to stay.  That U.fl connection is so weak.  I tried a dab of hot glue of the top of it but the Unify gets hot enough to melt hot glue; at least it did while it was sitting still.  Any tips to get this tiny connector to stay in place?


Thanks!
Quads:  RealACC X6R ; RealACC X210 Pro, Omnifbus F3 FCs; RunCam Swift 2 & Swift 2 Rotor Riot, Emax OG Red Bottoms, Emax RS2205S 2300kv; Fatshark DOM V3 YouTube - Mr.E_fPv
Reply
Login to remove this ad | Register Here
#2
Have you tried Bondic. Light cure, water resistant, heat resistant. I love this stuff.

https://www.amazon.com/dp/B00QU5M4MG/ref...3zbP405FNN

Since u. FL uses undercuts for retention, you can push in the leaves on the connector to get a tighter fit. But Bondic will help.
Reply
#3
Nice, I've never heard of Bondic. Looks interesting.
Quads:  RealACC X6R ; RealACC X210 Pro, Omnifbus F3 FCs; RunCam Swift 2 & Swift 2 Rotor Riot, Emax OG Red Bottoms, Emax RS2205S 2300kv; Fatshark DOM V3 YouTube - Mr.E_fPv
Reply
#4
Much cleaner than hot glue. Great for port connectors and wire after soldering.
[-] The following 1 user Likes voodoo614's post:
  • rryyyaann
Reply
#5
Shrink tube and black silicone is what was recommended by TBS support. I put the shrink tube on and that holds in in place very nicely.
Quads:  RealACC X6R ; RealACC X210 Pro, Omnifbus F3 FCs; RunCam Swift 2 & Swift 2 Rotor Riot, Emax OG Red Bottoms, Emax RS2205S 2300kv; Fatshark DOM V3 YouTube - Mr.E_fPv
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  TrueRC Singularity 5.8 RHCP SMA Narsil 13 2,011 18-Apr-2020, 09:53 PM
Last Post: Narsil
  SMA/RP-SMA? illushinz 8 2,088 21-Nov-2016, 07:17 PM
Last Post: illushinz


Login to remove this ad | Register Here