What's everyone's prefered TX Gimbals tensions?

Wanting to adjust the tension on my Taranis gimbals curious to know what everyone else prefers for each axis 
Throttle/pitch/roll/yaw.

I like having them as loose as possible. I loosen them until they can't recenter and then back a bit. Remove the "clicks" on the throttle and then in firmware put yaw deadband around 10.

I have the right stick (mode 2) as loose as possible so that it still centers, on the left stick I have the yaw as tight as possible and throttle loose enough to hold its position.

Oscar's got a good tutorial on how to adjust gimbals: https://oscarliang.com/transmitter-gimba...aranis-tx/

I couldn't tighten mine enough so I replaced the gimbals with better ones. I dunno how anyone can fly with loose sticks

I have mine pretty stiff, I pinch my sticks and sometimes during a flight I'll have to readjust my grip so I'll let them go slightly and it helps me to know they are center when I grip them again.

I like firmer sticks also.

I like my throttle loose to the point it barely holds position when let go. As for the rest of them, don't care really as long as they work reasonably smooth.