If you enjoy our forum, why not join us? :) Login removes all the ads too! Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tokio SX
I took my a long time, but I finally finished this quad.  This is my first stretch frame.

Frame: Tokio SX 5 inches
Motors: Emax RS2306 2400KV
ESC: Sunnysky R30 (courtesy of the forum)
FC: CL Racing F4S
Camera: Foxeer Arrow V3
VTX: Tramp V2
RX: XSR using new F.Port for both controls and telemetry
Props: Dalprop Cyclone T5046C

Photo of parts (note: I swapped out the CL Racing F4 for the new F4S)

Photo of Tramp

This frame has built-in softmount

Getting motors and ESCs soldered and fitted

Soldering all the wires to FC

Finished without props

Ready to go

[-] The following 4 users Like voodoo614's post:
  • sloscotty, Tom BD Bad, kaitylynn, sirdude
Nice looking build Voodoo!
"Damn the torpedoes!!!  Full speed ahead!!!"
Nice! Do you have plans for the pod? Custom airbrush painted?
Login to remove this ad | Register Here
No plans for the pod. Going to difficult to get paint to stay. First crash will destroy the paint job anyway. I actually like the semi translucent look.
Looking very nice. Lovely soft mount. Where is the VTX attached?

When will it fly? Smile
Nice one Voodoo, I guess your running 4s? Whats the AUW?
Windless fields and smokeless builds
Login to remove this ad | Register Here
Yes, running 4S 1300mah. Quad weight is 366 grams. AUW is 550 gram. Which includes battery strap and dual lock that I still need to add.

I have a different pod that carries a Gopro. So I have not measured that complete weight yet.
[-] The following 1 user Likes voodoo614's post:
  • Tom BD Bad