06-Dec-2017, 03:37 AM
I took my a long time, but I finally finished this quad. This is my first stretch frame.
Frame: Tokio SX 5 inches
Motors: Emax RS2306 2400KV
ESC: Sunnysky R30 (courtesy of the forum)
FC: CL Racing F4S
Camera: Foxeer Arrow V3
VTX: Tramp V2
RX: XSR using new F.Port for both controls and telemetry
Props: Dalprop Cyclone T5046C
Photo of parts (note: I swapped out the CL Racing F4 for the new F4S)
Photo of Tramp
This frame has built-in softmount
Getting motors and ESCs soldered and fitted
Soldering all the wires to FC
Finished without props
Ready to go
Frame: Tokio SX 5 inches
Motors: Emax RS2306 2400KV
ESC: Sunnysky R30 (courtesy of the forum)
FC: CL Racing F4S
Camera: Foxeer Arrow V3
VTX: Tramp V2
RX: XSR using new F.Port for both controls and telemetry
Props: Dalprop Cyclone T5046C
Photo of parts (note: I swapped out the CL Racing F4 for the new F4S)
Photo of Tramp
This frame has built-in softmount
Getting motors and ESCs soldered and fitted
Soldering all the wires to FC
Finished without props
Ready to go