If you enjoy our forum, why not join us? :) Login removes all the ads too! Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tips for DIY PSU for LiPo Chargers
#1
I will use this thread as a place for tips/links of cheap DIY Lipo chargers, feel free to ask questions and submit links/info too.

DIY Tutorials

Tips
  • Add fuses
Don't be a LOS'er, be a FPV'er :) -- Blog - Facebook - Instagram - Twitter - Google Plus
#2
While a fuse won't do any harm, ATX PSUs have overcurrent protection - specifically any single rail can't output more than 240w (according to ATX specs), that is 20a on 12v. This is the reason why more powerful gaming units have to have more separate 12v rails available.

EDIT: afterthought: it actually may be a good idea to use a fuse IF your PSU has more rails AND you soldered them together into one line, because overcurrent protection will kick in only after reaching 40 or 60 amps, depending on number of 12v rails available.
Find me on Youtube and Instagram. I currently fly: NOX5, NOX5RAirblade Assault 130 and drive a scrap RC car
Reply
#3
I made one of these a few years ago and I still use it, not as fancy as your's though.
Current quad: ZMR 250 / DYS SE2205 / Littlebee 20A ESCs / Drone Lab 1500 4S / Naze32 Rev5 / BF 2.7.1
FPV: Runcam Skyplus / Aomway 200mw VTX / Fatshark DomV1
>>>>>>>>>>Check Out My Build<<<<<<<<<<
Reply
Login to remove this ad | Register Here
#4
On the 400W one, what is the switch for? i notice it's got the mains switch at the back.

Is it hooked up though the green and grey wire to power it up somehow?
Reply
#5
(10-Oct-2016, 02:00 AM)mjcfpv Wrote: On the 400W one, what is the switch for? i notice it's got the mains switch at the back.

Is it hooked up though the green and grey wire to power it up somehow?

I can switch mains power on the back, but it will still stay in standby mode. Switch on front grounds green wire, activating the PSU.
Find me on Youtube and Instagram. I currently fly: NOX5, NOX5RAirblade Assault 130 and drive a scrap RC car
Reply
#6
Question 
First of all, thanks for the great tutorial using the DPS-800 (https://oscarliang.com/cheap-lipo-charger-psu/). Smile

I bought this one: http://www.ebay.com/itm/112274380088 and followed the instructions (soldering the 2 jumper wires), but when I plug it in I get absolutely nothing. No green light, no fans, no voltage.

Is my PSU broken, or is the model different enough from the one in the example that I need different jumpers, or did I just do something wrong? Any ideas for things I can try? Sad

The contact portion of the board was bent on arrival (in shipping I'm guessing, it was just in a padded envelope) so I'm wondering if that killed it. I'll try to get a refund if nothing else works, but wanted to make sure it really is dead first.



Thanks!
Reply
Login to remove this ad | Register Here


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help LiPo Issues Spiinner 6 64 26-Jun-2017, 06:28 AM
Last Post: voodoo614
  LiPo Charging Spiinner 2 47 25-Jun-2017, 09:29 PM
Last Post: Spiinner
  New Product Lipo with detachable balance lead Gens Ace Pimousse 11 1,606 23-May-2017, 09:43 AM
Last Post: Maddy K
  Putting Puffy LiPo in Freezer cche 8 368 22-May-2017, 06:17 PM
Last Post: unseen
  Discussion PSU for ISDT chargers for travelling JPFlorida 2 179 26-Apr-2017, 10:10 PM
Last Post: Grisha0