20-Apr-2017, 03:13 AM
Yeah thats not too bad if it is just the first 20 FCs.
"Tiny Whoop" that runs 7mm motors! (spoiler, I like it!) |
20-Apr-2017, 03:13 AM Yeah thats not too bad if it is just the first 20 FCs. 15-Jul-2017, 01:37 AM I do like the specs on this machine but I run Spektrum gear which is incompatible. Id like to build one from parts but using a brushed Spektrum compatible integrated FC instead. So, can anyone tell me (in millimetres) what the distance is between the mounting points on this frame. Cheers D 15-Jul-2017, 05:58 AM (This post was last modified: 15-Jul-2017, 06:00 AM by Tom BD Bad. Edit Reason: stupidity! ) From the review on Oscars blog "The mounting pattern is exactly the same as the tiny whoop: adjacent screws at 25.5mm, diagonal screws at 37mm." Oh and welcome to the forum Meats, I hope that you are a friendly person otherwise you would be 'Cold Meats' Windless fields and smokeless builds 15-Jul-2017, 06:34 AM Thanks Tom Yeah I'm friendly enough. That means any micro FC with ~26mm mounting holes should fit. I'm going to give this one try https://nemosminiquadsupplies.com.au/col...m-receiver I'll report back on how the install and setup goes for anyone else wanting to build one that doesn't use a Frsky tx. 12-Aug-2017, 05:59 PM So I have gone through two of these little units now. The FC board gets noticeably warm just plugged into the USB port working on Beta Flight settings. The first unit when I had it all setup in BF. I went to bind to the radio, plugged in the battery and all the motors spun up for 1-2 seconds and died. The quad would not power on with the batteries anymore, however, would power up using USB. Got a replacement, and everything looked good until I went to test the motors in Beta Flight. Motor #3 will not stop running now. I REALLY want this little quad to work, I love the design. Anyone else see any issues with these? Anyone notice theirs getting warm from USB use? Thanks! |
« Next Oldest | Next Newest » |
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Ordered the HDZERO mob6 with the eco camera and 28k motors | Rob Axel | 35 | 1,021 | 21-Apr-2024, 06:25 PM Last Post: iFly4rotors | |
1102 motors on a 65mm pusher? | ph2t | 12 | 244 | 20-Apr-2024, 03:30 AM Last Post: brettbrandon | |
Build 1106 motors on 4S for a 2" prop | mstc | 10 | 193 | 19-Apr-2024, 06:30 PM Last Post: mstc | |
Build Flylens85 Walksnail 3S cruise whoop build | mstc | 8 | 267 | 04-Apr-2024, 05:14 AM Last Post: Cyberess | |
LHCP ufl Antenna suggestion for 80mm whoop | Maverick | 19 | 787 | 12-Mar-2024, 11:41 AM Last Post: Yohfpv |