08-Sep-2016, 10:16 PM (This post was last modified: 08-Sep-2016, 10:28 PM by sushicanfly.)
Need some advice, my taranis timer has stop counting time!
That is the second time it happens to me. The moment I give throttle it start counting time. Now it does not do anything, it is stop at 9h06 (9 hours 6 mins).
Look my very first model jammed at the exact same time! Back then I copy paste the model and created a new one and reset the timer.
Got any ideas?
Okay to my own question, in programming you have this data type call a "INT" or integer, you can store data in it. Well the maximum data you can store in a INT is 32767. 32767 in seconds = to 9 hours 6 minutes 7 seconds!
I uploaded the new firmware on my Taranis to fix all those issues. I have now 2.1.8 and my timer can go over 9:06:07!
boom have a great day!
That is the second time it happens to me. The moment I give throttle it start counting time. Now it does not do anything, it is stop at 9h06 (9 hours 6 mins).
Look my very first model jammed at the exact same time! Back then I copy paste the model and created a new one and reset the timer.
Got any ideas?
Okay to my own question, in programming you have this data type call a "INT" or integer, you can store data in it. Well the maximum data you can store in a INT is 32767. 32767 in seconds = to 9 hours 6 minutes 7 seconds!
I uploaded the new firmware on my Taranis to fix all those issues. I have now 2.1.8 and my timer can go over 9:06:07!
boom have a great day!