Hi Guys, I am in need of help! I have flashed my taranis to version 2.2.0 including bootloader. I added my Micro Crossfire and tried to bind and I am getting this error during binding 

"Missing File Reload TX FW" 

Can anyone shed some light? (if it helps the receiver is connected to a fixed wing and does not have a Flight Controller.
Contents of sd card are also updated.
Thanks guys

Firstly, Your should be able to bind without an FC.
Secondly, Try to update your sd card content to the v2.2 (Delete everything on the SD card and copy everything over again to be sure)
Final resort would be to reload the TX firmware, or try a different revision perhaps.

Finally, take a look at this video:

Hello. This is an old post but is the only one on the internet i could find with the exact error im getting. After updating the crossfire micro tx to the 2.2.3 (latest right now) and getting the sdcard files from opentx, i try to bind it with my rx and it says:

"Missing File Reload TX FW"

By the way: The rx blinks slow green while waiting for bind, then after clicking BINDING on the radio and error "Missing File Reload TX FW" appears, the rx changes to blinking slow red.

Any ideas? Thanks in advance

SOLVED - In my case the problem was the firmware on the micro TX. I was using the latest available now (2.93) but it didn't work, so i downgraded to 2.41 (using the tbs agent) now is all good, all binds.

I have exactly the same problem, but downgrading didn't help((. I am completely desperate. What else could be the problem?

Can you provide more details?

What version of:

-OpenTX
-Crossfire LUA script
- Crossfire TX
- Crossfire RX