Hello Together
I am controlling a T-Motor F7 Pro Full Function (https://store.tmotor.com/goods.php?id=1227) via a Graupner remote control and SBUS. This works fine so far, but when I hook the caddx polar unit via "dji plug and play" my own receiver no longer works. I use INAV 4.2 and have the peripheral "DJI VTX" on UART 1 and the receiver on UART 2 "serial". I assume that now the DJI receiver takes over, but where can I disable it? I want to use only the video through the plug and play connector.

Two SBUS receivers connected to the same UART will just be interfering with each other and neither will work.

Simply just remove the SBUS wire from the connector on the FC and/or the Air Unit then your Graupner receiver will then start working again.

(16-Aug-2022, 12:26 AM)SnowLeopardFPV Wrote: Two SBUS receivers connected to the same UART will just be interfering with each other and neither will work.

Simply just remove the SBUS wire from the connector on the FC and/or the Air Unit then your Graupner receiver will then start working again.

That makes sense. Thank you very much!

I also need help showing me how to connect tmotor f7 FC with flysky fs- ia6B reciever

(01-Jul-2023, 02:55 PM)Pumpkin head Wrote: I also need help showing me how to connect tmotor f7 FC with flysky fs- ia6B reciever

This has been answered in your original thread. Please don’t ask the same question in multiple threads, or people end up wasting their time answering a question that has already been answered.