http://www.banggood.com/Syma-X5C-Explorers-2_4G-4CH-RC-Quadcopter-Mode-2-With-Camera-p-913827.html

Syma x5c-1 with eversion (quasi acro mode) and two modes.
It has a possibility to to switch between modes 
Syma's mode 1 = standard mode 2
Syma's mode 2 = standard mode 4

Modes explained from Oscar's page



you can take pictures and record videos in standard "HD" (read low quality) resolution, and it saves them on SD card.

Pros:

• cheap
  
• Super stable, awesome craft for beginners, would recommend for anyone starting in this hobby.
  
• Excelent and bright LEDs, you can see the craft from really far away.
  
• cheap and easy to extend range via super simple TX mod http://www.instructables.com/id/Quadcopter-Range-Hack/
  

Cons:

• Somewhat bulky and low weight, as such really hard to fly in windy conditions.
  
• Yaw rate doesn't scale with high mode, and is really poor.
  
• low range with default TX antenna 
  

I bought all the spare parts, and after much abuse i replaced 1 prop (one of the props on the quad was bent on arrival) 2 prop guards, and 4 motors, nothing else...

You won't regret buying it...

EDIT 15.04.2016: I fly it with Turnigy 9x with goebish multi module in JR slot.
Video: 

I have one of these and my yaw rate seems fine. But i do have a mate who has one and his yaw rate is pretty slow.

Maybe i just got lucky haha.

These are great but yes my yaw rate is quite slow.

I've had mine for 2weeks and I'm very impressed with its ability to survive crashes, and how it fly's, two of my mates have bought one as well after seeing me fly mine, and they are impressed, a great starter drone, would recommend,

I have only ever broken 1 prop on mine and that was from crashing it into my knee xD

Great quad, haven't broken anything on mine except for a few scuffs and scratches.

Here you go guys, flying my syma with turnigy 9x with multimodule from goebish
its da bomb!
at around 2 minute mark you can see how tight it can turn

That's pretty cool.. Does that module work with the stock 9X TX module or the Frsky one?

How is it connected to the Syma?

oops, haven't seem the comment before otherwise i'd respond asap

the module is TX side module, its connected in the JR slot. i even printed out an enclosure for it

these are the links

https://github.com/goebish/nrf24_multipro

http://www.thingiverse.com/thing:1267983

you need to enter Syma mode (Elevator down + Aileron left = Syma X5C-1/X11/X11C/X12) while powering on the TX for the first time... every subsequent turning on leaves it in that mode until you change it.... i also bought H8 mini, works charms with the same module (Elevator up + Aileron right = EAchine H8(C) mini, BayangToys X6/X7/X9, JJRC JJ850, Floureon H101 ...)

(27-Apr-2016, 12:07 AM)matas Wrote: oops, haven't seem the comment before otherwise i'd respond asap

the module is TX side module, its connected in the JR slot. i even printed out an enclosure for it

these are the links

https://github.com/goebish/nrf24_multipro

http://www.thingiverse.com/thing:1267983

you need to enter Syma mode (Elevator down + Aileron left = Syma X5C-1/X11/X11C/X12) while powering on the TX for the first time... every subsequent turning on leaves it in that mode until you change it.... i also bought H8 mini, works charms with the same module (Elevator up + Aileron right = EAchine H8(C) mini, BayangToys X6/X7/X9, JJRC JJ850, Floureon H101 ...)

That's good to know
very neat ! would be handy when i decided to modify my syma hehe

So if it works in a JR slot, we could theoretically use it on a taranis?

(06-May-2016, 05:50 PM)GameOverMan Wrote: So if it works in a JR slot, we could theoretically use it on a taranis?

yes i believe so!