Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Swapped ESC
#1
I had to swap an ESC due to it exploding I couldn't get the same one so got one as similar as possible. When I plug the battery in the motors twitch as they should but it only makes half of the startup beep sequence it should and no leds light up on the lux fc. Any ideas? Do I need to reset something in beta flight, not sure if it will even connect as I don't have a computer to hand.

Thank you very much for any ideas.
Reply
Login to remove this ad | Register Here
#2
Make sure you flash with the same version firmware and calibrate the ESCs again.

You will need a computer to do this.
Reply
#3
Thanks voodoo Im not sure how to do this "b heli suite"? 3x dys xms30A 1x favorite little bee 30A
Reply
#4
Flash with blheli suite or chrome extension.

ESCs calibration in betaflight configurator. Or in blheli suite.

I have never ran different ESCs, but I can't see why it wouldn't work. You might have to flash the little bee separately.

You should bought the same esc, they sell the DYS xsm 20a.
Reply
#5
If you don't get the low/high beeps after the three beep startup tone, then the ESCs are not seeing a throttle signal from the flight controller.

If you don't get any LEDs on the flight controller lighting up then I'd say that the ESC that blew up also took the flight controller with it.
[-] The following 1 user Likes unseen's post:
  • RENOV8R
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Solved Cannot connect ESC derange 2 80 22-Mar-2024, 10:05 PM
Last Post: derange
  Solved Cannot recognise 1 Esc at 4in 1 Esc Mad35 11 169 12-Mar-2024, 01:47 PM
Last Post: Pathfinder075
  Help ESC working but motor not spinning Prashant1901 1 107 10-Mar-2024, 02:09 AM
Last Post: Pathfinder075
  esc-configurator.com Krohsis 9 265 16-Feb-2024, 06:32 PM
Last Post: MomoBrut
  Motor or ESC ? Flybyjim 4 152 13-Feb-2024, 12:31 AM
Last Post: Flybyjim


Login to remove this ad | Register Here