Then I have checked the radio. Short version - it looks like I have done something wrong in the mixing, but I don't know what.

Here you can see my mixer settings:
Mixer settings page 1

Mixer settings page 2

Mixer settings page 3



When I check the stick input it looks OK
Stick input 0% throttle -> showing -100

Stick input 100% throttle -> showing +100

Then we come to Mixer Output things start to look strange
Mixer output throttel on 0% -> showing -125

Mixer output throttel on 49% -> showing -26 (Close enough to zero which I think is mid stick in Deviationtx

Mixer output throttel on 50% -> showing -115 (expecting close to zero)

Mixer output throttel on 100% -> showing -115 (expecting+100 or +125 depending on mixing)


It looks like all output on throttle goes back to zero (-115) when the stick passes midstick.


So any ide on how to get this the right way?

No one got any ide?

My only option with my knowledge is to delete the whole setup, and start all over again and see if that helps.

(20-Feb-2017, 07:51 AM)Skiboy Wrote: No one got any ide?

My only option with my knowledge is to delete the whole setup, and start all over again and see if that helps.

sorry mate, I want to help but don't have this radio I only use Taranis at the moment...

(20-Feb-2017, 07:51 AM)Skiboy Wrote: My only option with my knowledge is to delete the whole setup, and start all over again and see if that helps.

I'm not familiar with that radio, but I think starting over is not a bad idea.  I don't know why you'd want any mixer enabled - I'd disable mixes.  If your radio allows you to choose model type, don't use heli - use airplane.  Those are the only things I can think of.

Thanks anyway. I've learned something new in this thread (I think that is thumbs up )
I'll start removing the mixing (I think I found that in a thread somewhere and just added it without knowing why)
And then I will try to redo everything.