Good morning
I need your help and your knowledge to solve a problem that I find insoluble. I recently bought a Speedybee F7 V" stack with its 4in1 ESC BL32 50A. This should have been natively BLHELI_S, however it seems to be in Blheli32, and remains only detectable with BLHELISUITE32,
Neither esc configurator nor blheli configurator can detect the 4 ESCs.
my problem is that I wanted to flash it with BLUEJAY but it seems impossible to go from BLHELI32 to BLUEJAY
My question then is this: how to reflash this 4in1 ESC to put it at least in blheli-S, starting point for a migration to bluejay.
thanks for your advices

You can't flash BLHeli_S or Bluejay firmware to a BLHeli_32 ESC. You can only use BLHeli_33 or AM32 firmware on it. Just stick with the native BLHeli_32 firmware and it will be fine.

People are flashing Bluejay to get the features and performance you get on Blheli32 with cheaper ESCs. You already have BLHELI32 ESC, I don't see the point to go to Bluejay even if it is possible.

hello, thanks for your answer
I think I made a big mistake with the ESCs supplied with the F405 V3 which allow an upgrade to bluejay. the BL32 50A ESC supplied with the F7V3 are indeed in BL32 and do not require an upgrade to bluejay
thanks again