Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sp Racing f3 acro issue
#1
I'm having a bootloader issue on my spf3, it's authentic. The problem is when I jump the boot pins it's still shows up as cp102x USB to uart. I tried another FC I had laying around and it enter DFU mode just fine. Anyone else ever have this issue?
Reply
Login to remove this ad | Register Here
#2
It doesn't use DFU mode, that's why!

If there's a CP2102 chip, you use the same interface for both flashing and configuring.
[-] The following 1 user Likes unseen's post:
  • Oscar
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help TinyHawk 2 Freestyle Rx issue Diesel79 3 135 27-Mar-2024, 09:15 AM
Last Post: Rob Axel
  Mobula 6 throttle issue with Tattu 300mAh HV batt husafreak 18 1,436 05-Mar-2024, 04:50 PM
Last Post: husafreak
  Build ACK80 Attack Chicken Walksnail with motor issue Cyberess 11 435 13-Feb-2024, 04:55 PM
Last Post: iFly4rotors
  Help GEPRC TinyGO 4K FPV Whoop RTF Controller issue aiflai 14 6,409 10-Dec-2023, 05:48 AM
Last Post: LEM17
  Weird issue with Crux 1S, drops out of the sky Andreas-sa 7 273 17-Oct-2023, 10:44 PM
Last Post: V-22


Login to remove this ad | Register Here