Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Soft serial X Racer F303 v2.1
#1
My thoughts are to run osd over uart 2 and telemetry on soft serial for my taranis. I have tried pins 7 and 8 together linke to smart port wire on my FrSky X4R-SB.
Reply
Login to remove this ad | Register Here
#2
does this help?
http://intofpv.com/t-xracer-f303-fc-v2-n...34#pid2534

have you enabled soft serial? have you chosen "Smart port" in the telemetry option in "Port Tab"?

another thing to check is your looptime, for F1 board it shuts down soft serial when running low looptime, i don't know if this is the case for F3 boards... but try to run 1Khz just for testing soft serial...
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply
#3
Yes I have enabled soft serial, smart port option etc, will check my loop time though. Are most people sacrificing telemetry for osd? I don't see much info on people doing both and running sbus. I have also read that post.
Reply
#4
(28-Jun-2016, 07:27 PM)Maverick_fpv Wrote: Yes I have enabled soft serial, smart port option etc, will check my loop time though. Are most people sacrificing telemetry for osd? I don't see much info on people doing both and running sbus. I have also read that post.

i think people normally only use one or the other... end of the day we just want to know what the battery voltage is...
Don't be a LOS'er, be an FPV'er :)  My Gear - Facebook - Instagram - Twitter
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Help Diatone MAMBA F405 MINI DJI FC default CLI dump or soft serial setup Original 12 2,400 27-May-2023, 12:38 PM
Last Post: Original
  JHEMCU GSF-405ABMI 3.5g budget 1-2S AIO serial ELRS, Baro, Blackbox, plentyUARTS, i2c mstc 7 529 10-Mar-2023, 09:02 PM
Last Post: romangpro
  Help Can I use soft serial to get another uart on this FC? Rob3ddd 2 617 10-Oct-2022, 12:07 AM
Last Post: Rob3ddd
  FAILED TO OPEN SERIAL PORT MicroFn 5 664 11-Dec-2021, 04:47 PM
Last Post: hugnosed_bat
  3 serial connections on F411-WSE? rsilk49 21 8,208 26-Jan-2020, 01:18 PM
Last Post: SnowLeopardFPV


Login to remove this ad | Register Here