Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Setting up Matek 5in1 PDB for lost model alarm on Naze (or any aux triggered device)
#16
Hello
sorry for my bad english.
With naze32 everything was ok. nice tutorial !!! thanks

but no I have the xracer F303 V3.1

I build it like the naze...
matek 5in1 v3 ...3 pins to the 1
Motors to 3-6

servo tilt....etc...

but it dosn´t work
only Motor 1and2 are running in betaflight
in blhelisuit...the program says 3and4 are ok. 1and2 not found.

:-(
please help

thanks
Martin
Reply
Login to remove this ad | Register Here
#17
Jazzcool, please, explain - I need to connect from MATEK to FC:

1) Ground wire and signal wire to AUX on ESC1 (without positive wire)
2) From 5V BEX - Ground wire and positive wire to first port AUX on ESC2
3) ESC1 to ESC4 to AUX ESC3 to AUX ESC6

I have X-RACER F303 V3.1.
Reply
#18
Will this work if I'm using a Frsky R-XSR? I've set it up but its not working on my F3 board. I'm trying to use ESC 7 or 8. I dont think my ESC ports have been pushed by two as another person in the thread noted on F3 boards. One thing I'm noticing is that when I enable the servo by checking the channel aux I'm using and save, then go to another tab and return....it is no longer checked anymore. Any ideas?
Reply
#19
Hey emailcraigs, This is a very old thread, maybe if you start a new thread in the welcome section and explain the problem, with links to the FC and ESC's you have, you may get a better response...
Windless fields and smokeless builds
[-] The following 1 user Likes Tom BD Bad's post:
  • unseen
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Tutorial Diatone ESC and Matek FC connection Cat_in_pants 4 454 05-Jul-2023, 09:05 PM
Last Post: Cat_in_pants
  Problem with setting up bidirectional Dshot Mlado53 4 3,438 09-Mar-2022, 04:46 PM
Last Post: Mlado53
  DIY RC Lost Alarm pablo18011 4 866 12-Jul-2020, 10:56 PM
Last Post: pablo18011
  120db Window alarm buzzer for old people HaroldBawls 10 1,858 18-Jul-2018, 12:19 AM
Last Post: HaroldBawls


Login to remove this ad | Register Here