Posts: 1
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Aug 2016
Reputation:
0 Hello
sorry for my bad english.
With naze32 everything was ok. nice tutorial !!! thanks
but no I have the xracer F303 V3.1
I build it like the naze...
matek 5in1 v3 ...3 pins to the 1
Motors to 3-6
servo tilt....etc...
but it dosn´t work
only Motor 1and2 are running in betaflight
in blhelisuit...the program says 3and4 are ok. 1and2 not found.
:-(
please help
thanks
Martin
• Posts: 2
Threads: 1
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jun 2017
Reputation:
0 Jazzcool, please, explain - I need to connect from MATEK to FC:
1) Ground wire and signal wire to AUX on ESC1 (without positive wire)
2) From 5V BEX - Ground wire and positive wire to first port AUX on ESC2
3) ESC1 to ESC4 to AUX ESC3 to AUX ESC6
I have X-RACER F303 V3.1.
• Posts: 1
Threads: 0
Likes Received: 0 in 0 posts
Likes Given: 0
Joined: Jan 2018
Reputation:
0 Will this work if I'm using a Frsky R-XSR? I've set it up but its not working on my F3 board. I'm trying to use ESC 7 or 8. I dont think my ESC ports have been pushed by two as another person in the thread noted on F3 boards. One thing I'm noticing is that when I enable the servo by checking the channel aux I'm using and save, then go to another tab and return....it is no longer checked anymore. Any ideas?
• Posts: 1,504
Threads: 83
Likes Received: 944 in 654 posts
Likes Given: 2,142
Joined: Sep 2016
Reputation:
24 Hey emailcraigs, This is a very old thread, maybe if you start a new thread in the welcome section and explain the problem, with links to the FC and ESC's you have, you may get a better response...
Windless fields and smokeless builds