I was trying to setup SBUS on my Flight controller (XRacer F3), and found the values on the Receiver tab just jumps around randomly.
I followed the necessarily steps, enabled Serial Receiver in configuration, setup the correct port as Serial RX.
Tried a different Flight controller and different X4R-SB RX, Still no joy...
Problem solved:
I forgot to change Serial Receiver provider!!! Changed it to SBUS and it worked beautifully...
I followed the necessarily steps, enabled Serial Receiver in configuration, setup the correct port as Serial RX.
Tried a different Flight controller and different X4R-SB RX, Still no joy...
Problem solved:
I forgot to change Serial Receiver provider!!! Changed it to SBUS and it worked beautifully...