Posts: 25 Threads: 0 Likes Received: 6 in 3 posts Likes Given: 0 Joined: Sep 2016 Reputation: 1 (21-Sep-2016, 05:20 PM)blazomusic Wrote: Yeah, but was it betaflight configurator, or OSD ? I have problems only when save and exit through OSD. It is strange, I changed to 32kHz unsynced and the motors are not spinning. I tried 5 times. I was using 8kHz because I think my motors sounded best. Marbalon, did you try to reproduce the bug on 8kHz ? One last two questions, there is option to display nickname in OSD, where I can set it? I was searching through OSD and can't find it. Also what is "NC" pad in LED PORT? Thanks for your work Marbalon, I love this controller, and I hope there will be full support for the future versions! If you need a tester, I can always help. Ok, thanks for your test, I have idea how to fix this. 32kh need smaller delay to detect PWM lost so during restart ESC reinitialized. On 8Khz probably reset is detected as impulse... Name is the field "craf_name" in GUI/connfiguration tab, bootom left. NC - Not connected ;-) just for feature use. I will made new version with some bugfixes and will give you new release. • Posts: 25 Threads: 0 Likes Received: 6 in 3 posts Likes Given: 0 Joined: Sep 2016 Reputation: 1 Update: I've just re-uploaded new version 3.0.1 on the server. - Fixed problem with spining ESC or OSD restart on some ESC - please verify - ARMED text moved to the center - some new variables in MENU Enjoy ;-) • Posts: 15 Threads: 0 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Sep 2016 Reputation: 0 (22-Sep-2016, 11:52 PM)marbalon Wrote: Update: I've just re-uploaded new version 3.0.1 on the server. - Fixed problem with spining ESC or OSD restart on some ESC - please verify - ARMED text moved to the center - some new variables in MENU Enjoy ;-) I tested new version today. Both 32kHz and 8kHz unsynced, at least 5 times each, restarting through OSD. None of the motors were spinning. So I think it is OK Thanks!! • Posts: 15 Threads: 0 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Sep 2016 Reputation: 0 23-Sep-2016, 07:53 PM (This post was last modified: 23-Sep-2016, 07:59 PM by blazomusic.) Ok, I think I found another thing. I installed programmable LED strip today. (I have cleared all led settings in configurator) The issue is that I cannot disable the lights. When I set LED strip to OFF in OSD features, it comes back ON after restart. I also tried to set the color to BLACK. It disables the lights as I want, but after restart leds start to shine in WHITE color (Although in OSD menu there is color - BLACK) So there is no way to disable LEDs via OSD. All other colors work fine If I could turn them off by setting color BLACK it would be perfect! I hope it can be easily and fast fixed. Or maybe I am doing something wrong. ( btw. I saved today OSD settings many times, no issues at all with spinning motors- thanks! ) • Posts: 25 Threads: 0 Likes Received: 6 in 3 posts Likes Given: 0 Joined: Sep 2016 Reputation: 1 (23-Sep-2016, 07:53 PM)blazomusic Wrote: Ok, I think I found another thing. I installed programmable LED strip today. (I have cleared all led settings in configurator) The issue is that I cannot disable the lights. When I set LED strip to OFF in OSD features, it comes back ON after restart. I also tried to set the color to BLACK. It disables the lights as I want, but after restart leds start to shine in WHITE color (Although in OSD menu there is color - BLACK) So there is no way to disable LEDs via OSD. All other colors work fine If I could turn them off by setting color BLACK it would be perfect! I hope it can be easily and fast fixed. Or maybe I am doing something wrong. ( btw. I saved today OSD settings many times, no issues at all with spinning motors- thanks! ) OSD code "touch" only LED's with flag color. So first you need to go to LED_STRIP tab and set any color you want and then in OSd you can change it to other. But if you have any LED's without this flag - eg. throttle inicator - OSD don't touch this LED's, only if LED have flag color will be changed. • Posts: 15 Threads: 0 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Sep 2016 Reputation: 0 24-Sep-2016, 12:02 PM (This post was last modified: 24-Sep-2016, 12:04 PM by blazomusic.) (23-Sep-2016, 10:41 PM)marbalon Wrote: OSD code "touch" only LED's with flag color. So first you need to go to LED_STRIP tab and set any color you want and then in OSd you can change it to other. But if you have any LED's without this flag - eg. throttle inicator - OSD don't touch this LED's, only if LED have flag color will be changed. Yes I did exactly this. Today I checked once more. So I have 6 leds configured in color mode. When I get to OSD led strip, and change the colors, they change at the same time. Every color also works after restart. But when I set BLACK, first they are off. But when I restart battery, they start to shine in WHITE color. After setting to BLACK and restarting when I change the color through OSD, nothing is changing, WHITE stays. Can you please check it in your setup? Also changing LED STRIP ENABLED to NO in OSD doesn't work. After save and restart it is set to ON again. (If it works it could be another way to disable LEDs) • Posts: 25 Threads: 0 Likes Received: 6 in 3 posts Likes Given: 0 Joined: Sep 2016 Reputation: 1 (24-Sep-2016, 12:02 PM)blazomusic Wrote: Yes I did exactly this. Today I checked once more. So I have 6 leds configured in color mode. When I get to OSD led strip, and change the colors, they change at the same time. Every color also works after restart. But when I set BLACK, first they are off. But when I restart battery, they start to shine in WHITE color. After setting to BLACK and restarting when I change the color through OSD, nothing is changing, WHITE stays. Can you please check it in your setup? Also changing LED STRIP ENABLED to NO in OSD doesn't work. After save and restart it is set to ON again. (If it works it could be another way to disable LEDs) Fixed and reuploaded. • Posts: 15 Threads: 0 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Sep 2016 Reputation: 0 (25-Sep-2016, 10:59 AM)marbalon Wrote: Fixed and reuploaded. Thanks, the last version on the server is from 23 september 16:52 . I checked it now and it is still the same with LEDs. Is this the last version ? • Posts: 25 Threads: 0 Likes Received: 6 in 3 posts Likes Given: 0 Joined: Sep 2016 Reputation: 1 • Posts: 15 Threads: 0 Likes Received: 1 in 1 posts Likes Given: 0 Joined: Sep 2016 Reputation: 0 26-Sep-2016, 11:39 AM (This post was last modified: 26-Sep-2016, 11:40 AM by blazomusic.) (25-Sep-2016, 02:41 PM)marbalon Wrote: Sorry, check now. Ok I checked today and LED STRIP ENABLED set to NO works!! Now I can disable LEDs. Thanks so much for your work! • Posts: 3 Threads: 0 Likes Received: 0 in 0 posts Likes Given: 0 Joined: Oct 2016 Reputation: 0 Still waiting on a mini Manual, I managed to setup the FC last night and program the latest firmware after multiple attempts as Betaflight kept say could not find bootloader. now all I have to do is find out why I have no Video In as video out is working well with OSD nice and clear just a black screen behind it. • Posts: 3 Threads: 0 Likes Received: 0 in 0 posts Likes Given: 0 Joined: Oct 2016 Reputation: 0 Oh one other thing while I think of it, is there anyway to get telemetry back? • Posts: 195 Threads: 8 Likes Received: 86 in 54 posts Likes Given: 79 Joined: Aug 2016 Reputation: 6 (05-Oct-2016, 09:50 AM)Softman Wrote: Oh one other thing while I think of it, is there anyway to get telemetry back? Sadly no, they promised to add it on the next revision of the board but there's nothing we can do to get tememetry on the current version which is a bummer. • Posts: 3 Threads: 0 Likes Received: 0 in 0 posts Likes Given: 0 Joined: Oct 2016 Reputation: 0 Any chance of more Flight modes? • Posts: 195 Threads: 8 Likes Received: 86 in 54 posts Likes Given: 79 Joined: Aug 2016 Reputation: 6 Which ones would you like to have? • |