17-Mar-2016, 02:44 AM
Just received my RED Rotor OSD PDB
It's pretty easy to connect: camera goes in , and on the other side to the VTX. Both get power from the PDB, aswell is there a 5V output for the Naze32. Keep in mind, the 5V can not be shared to power additional led's ( i tried) Its not powerfull enough.
Spec:
- Dimension 36mmx36mm (30.5mmx30.5mm mouting holes)
- Built-in power distribution and regulators to handle 3S - 6S Lipo
- Built in multi stages power filter for Video Transmitter and Camera with pre-installed conveniently located connectors
- 12V and 5V output: can be used for FPV cam and accessories
- NTSC and PAL can be easily selected using the onboard button
- Plug and Play (PnP) OSD information: Flight pack voltage, current draw, total current consumption, RSSI, flight timer
- Maximum motor current 100A total
- Onscreen menu allows user to calibrate pack voltage reading, rssi input, battery alarm level…etc....