Hi Just bought a Radio Master T12 and can't get it to bind to my nano hawk X with Frysky reciever. Quad will bind with Emax transmitter. Any thoughts?
On another note, I am not in love with the nanohawk compared to the FPV cycle babytooth. Maybe I don't have the tune sorted. 
Thanks

What binding procedure are you using? There are two ways to do it - with the binding button on the FC, or by using the "bind-rx" CLI command. If the method you are using doesn't work then try using the other method.

If the above doesn't resolve your issue and have been trying to bind in D16 mode then try binding in D8 mode instead.

I can get the Quad to inter bind mode to reconnect with old Transmitter and have been trying D8 mode on the transmitter. Seems like the the transmitter is in the wrong mode or something. Granted there are a bunch of set up options around connecting to RX that I don't understand. 
Thanks 

Bruce

On your RadioMaster T12, make sure you select "MULTI" as the mode with "FrSky" and "D8" as the sub-modes before you put your T12 into bind mode.

1. Press the bind button in for 2 seconds while the flight controller is already powered on with a battery. When the BLUE LED is solid, it means the receiver is in BIND MODE.
   
2. Turn on the transmitter, make sure it is set to D8 mode, and then set it into bind mode. When the BLUE LED on the flight controller starts flashing, it means bind was successful.
   
3. Power down the flight controller and radio.