Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RaceKraft5051 on emax2205s - maiden...
#1
Guys, today we (with Konrad) had a chance to fly between strong wind, rain, snow, ice falling from the sky...
this is a short record of my first flight on racekraft 5051 on emax2205s motors (great combo)
be advised that this quad (nox5) is on raceflight beta software and has 0 tuning in it, and new props ...

here is the result of my first minutes with those props.. (get a bucket - you have been warned)

All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3,  Scrap
thinking about building: 450


[-] The following 3 users Like Grisha0's post:
  • Shawnp204, illushinz, KonradS
Reply
Login to remove this ad | Register Here
#2
Grish - How are the 5051 props treating your motor and ESCs?  I've heard that with that much pitch that the rest of the system is working a little harder.  Have you flown them much and gotten a good feel for how they are performing?
~illushinz (CenFloFPV)

FPV noob.  
Arris 250FPV, Naze32 Rev6 Acro
ZMR250, Naze32 Rev5 Acro

Youtube
Twitter
Instagram
Reply
#3
now im on around 10-15 packs on these props... still im in love...
however the new motors are very strong so they don't have problem spinning them.
im using racerstar esc 30A on blhelis...
and most probably due to the readings how they kill the batteries im flying in a different manner but... still i get over 4 minutes of flight on 1300 sls and battery is not below 3.7 by cell so im happy so far...
also im happy with durability i hate gf that i have 5040 ... they are good to fly... but one twig and you are out of the sky...
these 5051 babies... have flown through few trees, grass, mud, kitchen shelfs, done few flips of death (as RF kindly changed the quad type to 1234) and yes they are scrached, chipped and they lost their "tip" but still they fly damn well Smile

i think that the key for them is ... to have strong motors...
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3,  Scrap
thinking about building: 450


Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  PSA - Careful on them maiden flights kafie1980 4 447 01-Feb-2022, 04:40 PM
Last Post: Drone0fPrey
  Apex 3 inch maiden voyage! ebeez 2 376 24-Sep-2021, 01:52 AM
Last Post: ebeez
  Maiden voyage... ebeez 0 400 15-Jun-2020, 02:34 AM
Last Post: ebeez
  Lightwight High KV 6inch Maiden and burnt motor DVR Drone0fPrey 2 575 31-Mar-2020, 01:47 PM
Last Post: Drone0fPrey
  Maiden flight after rebuild now in HD UrbanJungle1966 2 471 22-Jun-2019, 10:36 PM
Last Post: UrbanJungle1966


Login to remove this ad | Register Here