Hey Folks,

I could really use your help.  I'm running betaflight on a cc3d board.  I was finally able to flash my esc with blheli 14.4

These are the esc's I have:

http://www.banggood.com/ZTW-Spider-Serie...46402.html

I flashed them with blheli 14.4 blue series multi 12a esc.  Left all the settings default

This is the result I get...



The motors seems to spin up properly in the motor tab.  Even with pid at 0, 0, 0 I get the same result.  Does anyone know what might be causing this?  I should mention that when it flips out, I'm just using very little throttle.  And yes I did calibrate the esc's

HamsterFPV had a similar problem to this when running beta flight ask him

(17-Mar-2016, 05:55 PM)lolFPV Wrote: HamsterFPV had a similar problem to this when running beta flight ask him

I had to flash Cleanflight in the end, Betaflight just wouldn't work with my ESCs. The video shows the exact problem I was having.

I'll try it out. Such a pain in the ass to flash cc3d. Thanks!

try disabling oneshot see if that make a difference?

Ok it's not one shot. I did realize something!! I have motors 1 & 2 switched. Dammit. Because this build is so small it's all soldered in. Is there an easy way for me to switch the motor order?

I ended up soldering the esc to the proper place.  Probably the better thing to do.  Thing thing flies extra smooth now with betaflight 2.5.3 & blheli 14.  I also noticed the weird airmode bouncing of the ground problem is gone

I think you could have switched the motor direction in blhelisuite

(18-Mar-2016, 04:44 AM)trojanGoat Wrote: Ok it's not one shot.  I did realize something!!  I have motors 1 & 2 switched.  Dammit.  Because this build is so small it's all soldered in.  Is there an easy way for me to switch the motor order?

haha... we won't laugh at you... for too long haha just this time.