Hiya flyers!
Potentially strange question:
I`m currently practicing LOS with my recently aquired Emax Tinyhawk Freestyle II, but mostly at night because, reasons :p
So I wondered:
Can I use something like HQ Durable Prop T63mmx6, 1.5 pitch or the 53mm on an Emax FSII, for indoor practice, very mild flying, just basic maneuvering, circles, nose-in practice, figure 8`s et cetera.
I`m not looking for much more than a hover though, only the occasional throttle up to avoid obstacles, and I will reduce throttle in Betaflight, unless I should just go with 1s, because I already dropped throttle to 75% as well as applying 25% expo on my Tx and I can barely touch the throttle before it want to live inside the ceiling. (#nooblife)
I just wonder if the reduced rpm (and therefore applied voltage) will result in a too high amp draw for the FSII`s AIO.
EDITED for consistency
Potentially strange question:
I`m currently practicing LOS with my recently aquired Emax Tinyhawk Freestyle II, but mostly at night because, reasons :p
So I wondered:
Can I use something like HQ Durable Prop T63mmx6, 1.5 pitch or the 53mm on an Emax FSII, for indoor practice, very mild flying, just basic maneuvering, circles, nose-in practice, figure 8`s et cetera.
I`m not looking for much more than a hover though, only the occasional throttle up to avoid obstacles, and I will reduce throttle in Betaflight, unless I should just go with 1s, because I already dropped throttle to 75% as well as applying 25% expo on my Tx and I can barely touch the throttle before it want to live inside the ceiling. (#nooblife)
I just wonder if the reduced rpm (and therefore applied voltage) will result in a too high amp draw for the FSII`s AIO.
EDITED for consistency
![[-]](https://intofpv.com/images/collapse.png)
