Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
QAV-XS Build Log and Review
#1
The new QAV-XS is Lumenier's new stretched X frame. The frame measures 180mm from the center of the front motors to the center of the back motors, and about 137mm across from the center of the front and rear motors. The frame is 4mm thick with chamfered edges which gives it a very nice super clean look. The top plate is 2mm thick, which also has chamfered edges. It is a mono frame so the arms and main part of the frame is one piece. But the carbon feels really stiff and durable so it's  safe to say that if you break an arm on this frame most likely you're going to have to replace more than just the frame.
[Image: VsrO31dl.jpg]
[Image: SLYJYQbl.jpg]
[Image: GyLgvqml.jpg]
[Image: wzK1hNol.jpg]
[Image: qFJjbe4l.jpg]

So for this build, I want something that's going to be aggressive in the turns, with a lot of torque, but with just enough top end speed to really scream in straight aways. But yet still smooth as butter. So my build list is,
KISS FC
KISS 24A-RE ESCs (which came from the factory already flashed with 1.08 which means they should be dshot ready).
Tiger F60 Pro - 2500KV Motors
Matek HUBOSD8-SE
Immersion Tramp VTX
RunCam Swift RR Edition
FrSky XSR Reciever 
[Image: V9olHeTl.jpg]
[Image: AeYFZT4l.jpg]
[-] The following 3 users Like JimmyLe813's post:
  • tozes, Oscar, fftunes
Reply
Login to remove this ad | Register Here
#2
Popcorn
Reply
#3
Nice. Wonder what props you will end up with. F60 do pack some punch! Cool
Reply
#4
You guys be the judge.


i will post my final thoughts after the rain stops and i get to tune and really fly this baby.
Reply
#5
Nice!
The Obsession IS Real!
My Youtube and Instagram links
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Build Helios - 3.5” Sub-250g (Sub 160g possible) DJI O3 Drone – Frame/Build Thread Recursion 12 1,601 25-Mar-2024, 10:28 PM
Last Post: Recursion
  Build 5in lightweight build hawk01 37 1,169 22-Mar-2024, 10:56 AM
Last Post: Jossey
  Build Whoosh - 3.5" build. PID settings? maxer 23 1,094 30-Dec-2023, 08:29 PM
Last Post: SnowLeopardFPV
  5 " build jajifpv 7 366 13-Dec-2023, 02:11 PM
Last Post: jajifpv
  A 4" build that never flew (The Ronin mk2 is alive!) drumgod 20 933 12-Dec-2023, 06:34 PM
Last Post: drumgod


Login to remove this ad | Register Here