24-Feb-2016, 12:01 AM
Ok guys, I need your expert help here.
Project: Micro brushed cleanflight capable fpv multicopter from scratch
Funds: 100$ quad and tx; 100$ FPV gear
Explanation: I am currently flying Syma x5c, and my single biggest choke for entering the big league is the transmitter. I have my mind set on taranis, but I won't be able to afford it till December this year. But i want to practice!
Since Syma's transmitter is not compatible with anything, and x5c's yaw rate is abysmal, I have to get the whole shabbang from scratch, and its a budget build.
I am looking at Micro Scisky controller, as it has DSM2 receiver integrated, but I need to find me a cheap DSM2 transmitter with atleast 5, if not 6 channels (i want to be able to switch acro and horizont while i learn, and if possible rate and expo). i do not shy away from second hand gear as money is at a premium. i would consider turnigy 9x, if i could find it without module for around 30$, as then i'd put in frsky telemetry module and build from there. Frame is no problem as i have access to 3d printers. i have abundance of 7mm motors for syma, so thats not a problem either.
After that i'll probalby get quanum fpv set.
any questions, info, links or brainfarts are greatly appreciated.
Project: Micro brushed cleanflight capable fpv multicopter from scratch
Funds: 100$ quad and tx; 100$ FPV gear
Explanation: I am currently flying Syma x5c, and my single biggest choke for entering the big league is the transmitter. I have my mind set on taranis, but I won't be able to afford it till December this year. But i want to practice!
Since Syma's transmitter is not compatible with anything, and x5c's yaw rate is abysmal, I have to get the whole shabbang from scratch, and its a budget build.
I am looking at Micro Scisky controller, as it has DSM2 receiver integrated, but I need to find me a cheap DSM2 transmitter with atleast 5, if not 6 channels (i want to be able to switch acro and horizont while i learn, and if possible rate and expo). i do not shy away from second hand gear as money is at a premium. i would consider turnigy 9x, if i could find it without module for around 30$, as then i'd put in frsky telemetry module and build from there. Frame is no problem as i have access to 3d printers. i have abundance of 7mm motors for syma, so thats not a problem either.
After that i'll probalby get quanum fpv set.
any questions, info, links or brainfarts are greatly appreciated.