Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
problems connecting omnibus f4 w xsr (telemetry)
#1
Hi Forum,

..I don't know what to do, once more:
I am trying to connect my xsr receiver to the f4 omnibus fc, and basic command channels + aux work fine,
I've done the "uninversion-hack" for the xsr, and upon startup (reboot) of the fc, the additional sensors show up on the taranis, but as soon as the fc has finished booting, they disappear again.
I've tried switching tlm_inversion on and off in the cli, tried pretty much everything I could find over google, but it doesn't want to "keep" the sensory. I do get the first four lines of sensors, but they appear to be from the receiver and not the fc. So no (persistent) connection to acc/barometer and so forth.
The Tx is on UART 3, ports configured correspondingly. Firmwares of fc and taranis are updated. Any ideas, anyone?..
Reply
Login to remove this ad | Register Here
#2
I am also having the same issue with my F4 Omnibus and XSR, but mine was also having an issue were it appeared the XSR was disconnecting/rebooting itself every 30 seconds or so after connecting up telemetry, this stopped when I removed it again... I dismissed this because my OSD has everything I need but it would be nice to get it working.
[-] The following 1 user Likes Snuffypot11's post:
  • campagnium
Reply
#3
Try flashing the XSR with new firmware. This resolved most of the telemetry issue.

http://www.frsky-rc.com/download/view.ph...rmware-XSR

Taranis X9D can use the bay port. Taranis QX7, you will need to use the S. Port slot. I will leave it to you guys to figure out how to update. There are plenty of video.

Check the download icon below picture and not the ones in the list.
[-] The following 2 users Like voodoo614's post:
  • campagnium, Snuffypot11
Reply
#4
(01-Jul-2017, 03:20 PM)voodoo614 Wrote: Try flashing the XSR with new firmware. This resolved most of the telemetry issue.

http://www.frsky-rc.com/download/view.ph...rmware-XSR

Taranis X9D can use the bay port. Taranis QX7, you will need to use the S. Port slot. I will leave it to you guys to figure out how to update. There are plenty of video.

Check the download icon below picture and not the ones in the list.

This did the trick! Thank you!

I now have all my telemetry working on my QX7 using the XSR.
Reply
#5
(01-Jul-2017, 03:20 PM)voodoo614 Wrote: Try flashing the XSR with new firmware. This resolved most of the telemetry issue.

http://www.frsky-rc.com/download/view.ph...rmware-XSR

Taranis X9D can use the bay port. Taranis QX7, you will need to use the S. Port slot. I will leave it to you guys to figure out how to update. There are plenty of video.

Check the download icon below picture and not the ones in the list.

..alright, I'll try asap! How to flash is no problem, I was just hoping I could leave everything "wrapped" - but since I have to sort of rebuild anyway (unibody frame cracked after crash..), it doesn't really make a difference ROFL
Thanks again and happy weekend!
Reply
#6
You probably don't need to unwrap. Just desolder the pos, neg and sbus from fc. These are the wires you will need.

Glad it worked out.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Connecting IA10B receiver to SpeedyBee F4V4 Ladu 2 81 12-Mar-2024, 05:46 PM
Last Post: Ladu
  Problems with Avatar HD V2 Agentu 3 233 15-Feb-2024, 05:35 PM
Last Post: Agentu
  Sudden motor/propeller problems TinyHawk 3 Plus fpvNewbie 8 225 03-Feb-2024, 06:57 PM
Last Post: Rob Axel
  bidirection DSHOT VS TELEMETRY ESC Eyes.fpv 1 206 25-Jan-2024, 05:28 AM
Last Post: V-22
  FrSky R-XSR not binding with Taranis QX7 ACCST Pete10 6 221 26-Dec-2023, 06:06 PM
Last Post: Rob Axel


Login to remove this ad | Register Here