Hallo 

I am struggeling with the wiring of the VTX and Camera towards the FC in order to get OSD.

The instructions of the component I am using are not very clear. 


So as a transmitter I use the the TRAMP HV it is wired directly towards the LIpo for its power (as explained in the instructions). From the Tramp 3 wires (Vbat, GND and Video) arrive in the Camera. No connection to the FC so far.

Wiring looks like illustrated below see right.




Now my question, on the instructions of the Tramps it says no splicing of wires. Would it be possible to add the connection as illustrated on the right. Just a wire from the Camera to the FC connections RAM and GND ????

Or will this be firework and a good deal for Banggood?


Thanks,

Samuel

Tell us what flight controller and camera you are using please!

Edit: Actually, don't bother, just watch this video instead.

By sending the video feed directly from the camera to the VTX you are bypassing the OSD. You need to connect the video wire from your camera to the VTX in on your FC and the Camera out to you Tramp. Definitely watch JB's video posted above too. It'll give you everything you need to know and more.