FC: GepRc F411 35A AIO 
VTX: RDQ Mach 3

NO OSD
No FC menu via sticks

I wired camera directly to the VTX and the smart audio wire to T1 on FC. im thinking i saw it the first couple times i plugged in but im not certain. my OSD tab doesn't save font style in betaflight either. any ideas?

If the camera is wired directly to the VTX, you have bypassed the OSD chip on the board. You should wire the camera to the Video pad and the VTX to the Vout pad on your FC.
See the second page of the manual for the wiring guide: https://geprc.com/wp-content/uploads/202...ANUAL2.pdf

(08-Sep-2022, 06:17 PM)V-22 Wrote: If the camera is wired directly to the VTX, you have bypassed the OSD chip on the board. You should wire the camera to the Video pad and the VTX to the Vout pad on your FC.
See the second page of the manual for the wiring guide: https://geprc.com/wp-content/uploads/202...ANUAL2.pdf

thats what i was worried about. now my motors won't spin after esc config. perfect. i feel like the people in Lost that continue to push numbers not knowing if what they're doing is actually doing anything and then questioning my/our entire existence. i'm playing duck duck goose with this MOTHER FUCKING drone!!! FUCK!!!!!!! A day away from meeting Sledge.

There is a steep learning curve in this hobby, but there are plenty of people willing to help. If you get frustrated or overwhelmed, just put it down and come back later when you're ready to try again.

What settings did you change on your ESC?

(08-Sep-2022, 07:45 PM)V-22 Wrote: There is a steep learning curve in this hobby, but there are plenty of people willing to help. If you get frustrated or overwhelmed, just put it down and come back later when you're ready to try again.

What settings did you change on your ESC?

word. i configured in esc config bluejay through google i believe.