Hello all.

I have been attempting to get Betaflight LUA scripts to work on my TX16S, and in the process of doing so, I have come to the realization that my crossfire is not getting any telemetry from the flight controller. I am only receiving the first 10 sensors from the crossfire. (1RSS, 2RSS, RQly, RSNR, ANT, RFMD, TPWR, TRSS, TQly, TSNR) I believe that this is the reason why the Betaflight lua script isn't working, as it is stuck on the "Waiting for API version" window.

Betaflight: 4.3
EdgeTX: 2.7.1

I have also made sure that the telemetry is enabled in the receiver tab in Betaflight. I have also posted a dump below.

Any help is greatly appreciated.

First thing to try is switching the RX and TX wires

Switched the wires with no luck. When I turned on the quad the crossfire receiver turned green, but I was unable to arm the quad, as well as the fact that I still didn't discover any new sensors from the FC.

What Crossfire firmware version are you running?

Try flashing the TX and RX via Agent M. (Recently the advice was to do it twice on the receiver for reasons I will not want to explain here, but this is official advice).

Else try flashing the receiver into Emergency firmware mode, re-bind, once the TX detects the receiver requires a firmware update, do that as well.

Crossfire Emergency update procedure is documented here: https://kamikatze-fpv.de/tbs-crossfire-emergency-update

I am running version 6.17 for crossfire.

did you manage to solve it? im facing the same issue after retiering from fpv for 3years now i can't get telemetry. same 10 sensors you get but nothing from BF