If you enjoy our forum, why not join us? :) Click here to register in a few simple steps

Login to remove this ad | Register Here
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Quad Pilot / First Buid / 210R
#1
Ok guys. Newb here. So I'm taking this kinda slow to figure things out. I did a "mostly full build". But really just a mock-up just to figure out how everything goes together. And how much room I have to work with. I know that a larger frame would have probably been much friendlier to work with for a first build. But I sure like the looks of this frame. Ive also discovered that a couple of the "UpGrades" aren't really compatible with each other. But I fully intend to integrate them for the final build. Since I will be a novice quad pilot, and my first build, I'm not necessarily looking to save weight or win any races. Just looking for a solid build / to learn / and to have fun. Here is what I have so far.

Catalyst Machine Speed Addict 210R Frame Kit
Arm Brace Set (210R) *** Not compatible with Bulkhead
FPV Antenna Rear Bulkhead Upgrade *** Not Compatible with Arm Brace
Upgrade Runcam Swift Side Plate (T2)
2207 - 2450kv T-Motor F60 motors
Littlebee BLHeli-s 30A speed controllers.
Spektrum F400 flight controller (not shipped)
Spektrum SPM4649t Quad Race Reciever
RedRotor RROSD Pro V2 PDB / OSD Combo. (In transit)
Runcam Swift camera
Lumenier TX5G6R Mini 600mW 5.8GHz FPV Transmitter with Raceband
TBS Triumph 5.8GHz CP FPV Antenna Set

And I'll be flying with:
Skyzone Sk1 Dual Antenna FPV Goggle V2
Spektrum Dx8 G2 Tx.

Now for the pic's:




Thanks For Looking
Randy
[-] The following 3 users Like PhoenixFord's post:
  • sloscotty, RENOV8R, BigglesFPV
#2
Nice looking build (mock up that is)..good job.

I also have the 210R and is one of my favourite quads.
My youtube channel

Reply
#3
(01-04-2017, 02:35 AM)BigglesFPV Wrote: Nice looking build (mock up that is)..good job.

I also have the 210R and is one of my favourite quads.

Thanks BigglesFPV. Waiting for my PDB / OSD to arrive before I can really move along any further with the build. I really wanted an OSD. But I couldn't decide between the RedRotor or the Little Piggy OSD. So I finally decided to just go with the RR OSD. Since I'm also still developing my soldering skills, I decided to not follow the Cat - Machine build. Instead of soldering the PDB already mounted in the bay. I've decided to use the mock-up to get my wire measuerments. Soler the ESC's to the board on the desktop. Then pass all the wiring and ESC's through the PDB bay.
[-] The following 1 user Likes PhoenixFord's post:
  • BigglesFPV
Reply
Login to remove this ad | Register Here
#4
OK Guys I resolved the compatibility issues with the "UpGrade Parts. If anyone is interested. I found a couple of 4-40 X 1.5" screws. And they work perfect. I'll grind off the access after the final build.



Reply