Hello guest, if you read this it means you are not registered. Click here to register in a few simple steps, you will enjoy all features of our Forum.
This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New member
#1
Hi all been looking at getting into fpv racing quadcopter been researching for ages was going to build my own from scratch but thinking of getting a kit like the one in the picture what's your thoughts been flying a mini drone and a cheap one too . Any info would be nice am from Blackpool in the UK
Want let me add the picture says to large so here is a list its £172 still need to add controller and Package included:
1 x Quadcopter frame kit(with Matek Mini power hub PDB) Martien 11 230mm
1 x Eachine VR009
4 x Emax RS2205S motor
1 x SP F3 flight controller (Integrate OSD)
4 x Littlebee 20A Pro ESC
1 x TS5828L
4 x 5045 bullnose propellers(2cw 2ccw)
Reply
Login to remove this ad | Register Here
#2
hello Smile

you are missing a camera for fpv Smile
and RX + TX combo
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3,  Scrap
thinking about building: 450


Reply
#3
Greetings from London, and welcome to the forum. I've got basically the same setup and it can't handle the aggressiveness of the 5045 props. Once I dropped to 5040s, all was good.
Reply
#4
I was just going to get the zmr250 kit but these look a lot better my mate as just ordered the vortex pro 250 . Don't want something that he is going to blow me away with .
Reply
#5
for the props start with KingKong 5040... and when you are comfortable move up... to triblades or to 5045 etd
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3,  Scrap
thinking about building: 450


Reply
#6
(07-Dec-2016, 08:06 PM)Gavlp20 Wrote: I was just going to get the zmr250 kit but these look a lot better my mate as just ordered the vortex pro 250 . Don't want something that he is going to blow me away with .

For 50 pounds more you can get one of these (w/cam and VTx): http://www.banggood.com/Diatone-Crusader...01201408U4

He won't blow you away then Big Grin

(Thanks to Grisha for finding this - http://intofpv.com/t-diatone-crusader-gt2 )
Reply
#7
if i would be starting the hobby now... i would buy the crusader... (part list looks good and the desing is really cool)
and you can start on kingkongs5040 biblades and move up as your skill grows Big Grin
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3,  Scrap
thinking about building: 450


Reply
#8
Wow that does look a beast that's the only think that comes to mind. What to do lol
Reply
#9
grab it + tx and rx and ... some batteries... and go fly Big Grin
basically this is all about it
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3,  Scrap
thinking about building: 450


Reply
#10
Yes think I will go for that cheers . I was wanting to build one but that is top my mate as just paid over £600 for his vortex
[-] The following 1 user Likes Gavlp20's post:
  • sloscotty
Reply
#11
(07-Dec-2016, 11:21 PM)Gavlp20 Wrote: Yes think I will go for that cheers . I was wanting to build one but that is top my mate as just paid over £600 for his vortex

Now you know we will want a full review (with pictures and video), don't you? Big Grin Big Grin
[-] The following 1 user Likes sloscotty's post:
  • Gavlp20
Reply
#12
Do you think a would be better with the 200 cause I do like the 150?
Reply
#13
(08-Dec-2016, 02:32 PM)Gavlp20 Wrote: Do you think a would be better with the 200 cause I do like the 150?

A 150 will limit you to 3" props (nothing wrong with that, you just need to know).  I've got a 160 (4" props), a couple of 130's (3" props), and a bunch of smaller stuff.  However, I am seriously considering buying the crusader 200 for myself.  It's hard to build any quad for that price, and it is really high-end IMHO.

(Unfortunately, not back in stock until Christmas Sad )
Reply
#14
Yeah just noticed that it said restock 11th yesterday now it's 25th I can wait but think it's the one I will go for .
Reply
#15
go for 200 more props to test Smile
All the best
Grzesiek (Grisha/ Greg)

Curently flyable: Nox 5, Minimalist 112
Bench / in progres: fixing Nox 3,  Scrap
thinking about building: 450


[-] The following 1 user Likes Grisha0's post:
  • Gavlp20
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  New member intro aerokam 9 393 30-May-2023, 06:01 AM
Last Post: aerokam
  New Member ClarkFPV3 2 177 29-May-2023, 01:49 PM
Last Post: iFly4rotors
  First Flight with forum member mstc FPVme 2 274 06-May-2023, 12:25 AM
Last Post: FPVme
  new member l-milk2804 2 217 02-May-2021, 09:00 PM
Last Post: iFly4rotors
  New member from the UK Burton_ii 5 391 21-Mar-2021, 10:38 AM
Last Post: Banelle


Login to remove this ad | Register Here